Wood joinery and furniture

Get every part from a cabinet’s sizes.

Software for wood joinery and cabinet makers that follows each cabinet from its sizes to the finished piece, in MDF, plywood or solid oak.

Open the live demo

Still on paper or spreadsheets? Read what changes

Follow each step on the phone · Wood joinery

The road of one order

Find any panel or oak board
Each panel, offcut and oak board is a numbered piece with its size. Oak is bought and counted by the cubic metre.
Find any panel or oak board. Demo data.
Price a cabinet to measure
Enter the width, the height, the depth, the shelves and the board. The quote lists the sides, top, bottom and shelves with their sizes, counts the edge banding in metres and adds hinges and labour.
Price a cabinet to measure. Demo data.
Use offcuts before full panels
Parts go on offcuts first, then on full panels, with the saw kerf between them. MDF parts may be turned, and plywood and oak parts keep the grain.
Use offcuts before full panels. Demo data.
Follow each step on the phone
A cabinet goes through panel cutting, edge banding, drilling and assembly, then finishing by an artisan paid by the piece. Whoever does a step closes it on their phone.
Follow each step on the phone. Demo data.
Pay the finisher by the piece
The finisher’s pieces go into the monthly pay. The delivery note and the invoice come from the same order.
Pay the finisher by the piece. Demo data.

3.13 m of edge banding for one cabinet

The ready-made base cabinet of 600 × 720 × 560 mm in 18 mm MDF gives 2 sides of 720 × 560 mm, a top and a bottom of 564 × 560 mm, one shelf of 564 × 540 mm, and 3.13 m of edge banding.

Open the demo workshop

The live demo is a stone workshop, with slabs, a hotel order, cutting plans and work orders. A cabinet follows the same steps, from its sizes to the cutting plan and the work order. The demo resets every night.

Open the live demo

The counter and HR are options, and some features depend on your plan.